Digital Library / STP / STP1496-EB

Masonry Trimble Brian, Brisch Joseph Pages: 168       Published: 2008

Download this E-Book for $55 PDF (2.9M)          View License Agreement          Hard Copy version

Table of Contents

Overview PDF

Investigation and Repair of Glazed Brick Cladding: A Case Study
Gorrell T., Chin I.

A Discussion of the Benefits and Problems of ASTM C 1324 for Analyzing Hardened Masonry Mortars
Powers L., Coleman A., Papas S.

Laboratory Study of Time-of-Tooling Effects on Mortar Joint Color
Erlin B., Conway T.

The Selection and Use of Natural and Manufactured Stone Adhered Veneer
Godbey R., Thomson M.

Deflection Criteria for Masonry Beams
Bennett R., McGinley W., Bryja J.

Variations in the Activity of Dry-Powder Water-Repellent Mortar Admixtures with Different Mortar Formulae
Nordmeyer H., Hall P.

Evaluation of ASTM Methods to Determine Splitting Tensile Strength in Concrete, Masonry, and Autoclaved Aerated Concrete
Parker C., Tanner J., Varela J.

Type S Portland Cement-Lime Mortar as a Low-Lift Grout
Biggs D., Thomson M.

The Effect of Void Area on Brick Masonry Performance
Sanders J., Brosnan D.

Evaluation of the Effectiveness of Clear Water Repellent Coatings on Partially Grouted Single-Wythe Concrete Masonry Walls
Greenwald J., Young T.

Seismic Evaluation of Low-Rise Reinforced Masonry Buildings with Flexible Diaphragms
Cohen G., Klingner R., Hayes J., Sweeney S.

Greening of Mortars with Pozzolans
Bargaheiser K., Nordmeyer D.

Replacement of the Final Time of Setting Maximum with an Initial Time of Setting Maximum as measured with the Gillmore Needles in ASTM C 91, C 1328, and C 1329
Conway J.

Committee: C12
Paper ID: STP1496-EB
DOI: 10.1520/STP1496-EB
ISBN-EB: 978-0-8031-6272-3

ASTM International is a member of CrossRef.
0-8031-3492-4
978-0-8031-3492-8
STP1496-EB