Digital Library / Topics / General Products, Chemical Specialties, and End Use Products / Space Simulation; Aerospace and Aircraft; Composite Materials / Recently Published

Special Technical Publications (STPs)

• STP1455 Joining and Repair of Composite Structures
• STP1436 Composite Materials: Testing and Design, Fourteenth Volume
• STP1416 Composite Materials: Testing, Design, and Acceptance Criteria
• STP1383 Composite Structures: Theory and Practice
• STP1357 Time Dependent and Nonlinear Effects in Polymers and Composites
• View Most Recent 25 STPs      View All STPs

Journal of ASTM International (JAI)

• Heat Treatment and Interface Effects on the Mechanical Behavior of SiC-Particle Reinforced Aluminium Matrix Composites
• Finite Element Modeling of the Effects of Delamination Damage on the Natural Frequencies of Composite Panels
• Strength of Quasi-Isotropic Co-Cured Composite Joints Under Quasi-static and Fatigue Loading
• Effect of Penetrator Size on Dynamic Failure Response of Woven Graphite Epoxy Composites around the Critical Perforation Energy
• New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites
• View Most Recent 25 JAI papers      View All JAI papers

Journal of Composites, Technology and Research (CTR)

• Composites Contents
• Calendar on Composites
• Refinements to the Mixed-Mode Bending Test for Delamination Toughness
• Wrinkling of Zebra Skin Sandwich Panels
• Stress Corrosion Cracking in a Unidirectional E-Glass/Polyester Composite Subjected to Static and Cyclic Loading Conditions
• View Most Recent 25 CTR papers      View All CTR papers

Journal of Testing and Evaluation (JTE)

• Production of Aluminum-Silicon Carbide Composites Using Powder Metallurgy at Sintering Temperatures Above the Aluminum Melting Point
• An Experimentally-Based Analytical Model of the Stress Field in an Iosipescu Composite Test Specimen
• Short-Beam-Shear Testing of Composite Rings With Variable Cross Section as Representative for Full-scale Delamination
• Measuring Stress Strain Curves to Large Strains on Sheet Metal
• Characterization and Simulation of the Creep Behavior of P92 Sandwich Structures at 923 K with Loading Transverse to the Intermediate Layer
• View Most Recent 25 JTE papers      View All JTE papers