Society Review of Main
Committee Ballot Actions
August 2008
Deadline for Receipt: Must be
Received Before: September 1, 2008
The items listed are
currently being balloted by the corresponding main
committee and are submitted here for review. To request copies of
proposed new standards and revisions of standards for review and voting
purposes only, please email socrev@astm.org
and provide the following information:
-
Your name
-
Your member number
-
The designation and title of the main committee of interest (e.g., A04 on Iron
Castings)
-
The designation of the ballot (e.g., #00-01)
-
The specific item(s) (e.g., Item 22)
After receiving the items
you’ve requested, if you would like to comment or vote negative you may submit
additional correspondence to ASTM Headquarters. All comments and
negatives submitted by Society members will be considered by the originating
subcommittee and main committee.
Key:
(#00-01) = Ballot Designation
#
(Sub.00) = Subcommittee
Jurisdiction
(CC) = Item is being balloted
concurrently by the subcommittee and main committee
(Ref. Z6287Z) = reference #
for new standards that have not yet been approved
B01 on Electrical Conductors (#08-02)
NEW STANDARD
New Standard, Specification
for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic
Space Application (Item 3) (Sub .02) (CC) (Ref. WK5820 )
REVISION OF STANDARD
B 400-04, Specification for
Compact Round Concentric-lay-stranded Aluminum 1350 Conductors (Item
4) (Sub .07) (CC)
B 786-02a, Specification for
19 Wire Combination Unilay-stranded Aluminum Conductors for Subsequent
Insulation (Item 5) (Sub .07) (CC)
REAPPROVAL OF STANDARD
B 193-02, Test Method for
Resistivity of Electrical Conductor Materials (Item
1) (Sub .02)
B 258-02, Specification for
Standard Nominal Diameters and Cross-sectional Areas of Awg Sizes of Solid
Round Wires Used as Electrical Conductors (Item 2) (Sub .02)
C11 on Gypsum and Related Building Materials and
Systems (#08-03)
REVISION OF STANDARD
C 11-08b, Terminology
Relating to Gypsum and Related Building Materials and Systems (Item
2) (Sub .91) (CC)
C 1280-07, Specification for
Application of Gypsum Sheathing (Item
1) (Sub .03) (CC)
C14 on Glass and Glass Products (#08-02)
NEW STANDARD
New Standard, Test Method for
Measurement of Roll Wave Optical Distortion in Heat-treated Flat Glass (Item 1) (Sub .11) (CC) (Ref. WK7898 )
REVISION OF STANDARD
C 1503-01, Specification for
Silvered Flat Glass Mirror
(Item 2) (Sub .08) (CC)
REAPPROVAL OF STANDARD
C 912-93(2003), Practice for
Designing a Process for Cleaning Technical Glasses (Item 3) (Sub .02)
D02 on Petroleum Products and Lubricants (#08-04)
REVISION OF STANDARD
D 1250-07, Guide for Use of
the Petroleum Measurement Tables (Item 1) (Sub .02) (CC)
D30 on Composite Materials (#08-02)
REVISION OF STANDARD
C 480-99(2005), Test Method
for Flexure Creep of Sandwich Constructions (Item 8) (Sub .09) (CC)
D 3039/D 3039M-07, Test
Method for Tensile Properties of Polymer Matrix Composite Materials (Item 1)
(Sub .04) (CC)
D 3171-06, Test Methods for
Constituent Content of Composite Materials (Item
2) (Sub .04) (CC)
D 5961/D 5961M-05E01, Test
Method for Bearing Response of Polymer Matrix Composite Laminates (Item
6) (Sub .05) (CC)
D 7248/D 7248M-07, Test
Method for Bearing/bypass Interaction Response of Polymer Matrix Composite
Laminates Using 2-fastener Specimens (Item
7) (Sub .05) (CC)
REAPPROVAL OF STANDARD
D 3410/D 3410M-03, Test
Method for Compressive Properties of Polymer Matrix Composite Materials with
Unsupported Gage Section by Shear Loading (Item
3) (Sub .04)
D 6856-03, Guide for Testing
Fabric-reinforced Textile Composite Materials (Item
5) (Sub .04)
WITHDRAWAL OF STANDARD
D 5467/D 5467M-97(2004), Test
Method for Compressive Properties of Unidirectional Polymer Matrix Composite
Materials Using a Sandwich Beam (Item
4) (Sub .04) (CC)
D31 on Leather (#08-01)
NEW STANDARD
New Standard, Test Method for
Test Method for Test Method for Brine Saturation Value of Cured (salt
Preserved) Hides and Skins (Item 1) (Sub .02)
(Ref. WK16710 )
New Standard, Test Method for
Determining the Area Stability of Wet Blue Submersed in Boiling Water (Item 2) (Sub .02) (CC) (Ref. WK19533 )
REVISION OF STANDARD
D 4576-01(2006)E01, Test Method for Mold Growth Resistance of Wet
Blue (Item 3) (Sub .02) (CC)
D 6015-00(2005), Test Method
for Static Water ABSorption of Leather (Item
7) (Sub .03) (CC)
D 6076-03, Test Method for
Shrinkage Temperature of Leather (Item
15) (Sub .07) (CC)
D 6657-01(2006), Test Method
for Ph of Wet Blue (Item 4) (Sub .02) (CC)
D 6659-01(2007), Practice for
Sampling and Preparation of Wet Blue for Physical and Chemical Tests (Item 5) (Sub .02)
D 6715-01(2007), Practice for
Sampling and Preparation of Salt Preserved (cured) Hides and Skins for Chemical
and Physical Tests (Item 6) (Sub .02)
REAPPROVAL OF STANDARD
D 2098-04, Test Method for
Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester (Item 8) (Sub .03)
D 2210-00(2004), Test Method
for Grain Crack and Extension of Leather by the Mullen Test (Item
9) (Sub .03)
D 2346-00(2004), Test Method
for Apparent Density of Leather (Item
10) (Sub .03)
D 2813-03, Practice for
Sampling Leather for Physical and Chemical Tests (Item
16) (Sub .07)
D 2941-00(2004), Test Method
for Measuring Break Pattern of Leather Break Scale (Item
11) (Sub .03)
D 5053-03E01, Test Method for
Colorfastness of Crocking of Leather (Item
13) (Sub .04)
D 6012-03, Test Method for
Determination of Resistance of Leather to Bleeding Color Stain Transfer (Item 14) (Sub .04)
WITHDRAWAL OF STANDARD
D 2214-02, Test Method for
Estimating the Thermal Conductivity of Leather with the Cenco-fitch Apparatus (Item 12) (Sub .03) (CC)
D32 on Catalysts (#08-02)
REVISION OF STANDARD
D 7442-08, Practice for
Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for
Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy (Item 1) (Sub .03)
(CC)
D34 on Waste Management (#08-01)
REVISION OF STANDARD
D 4979-95(2003), Test Method
for Physical Description Screening Analysis in Waste (Item
2) (Sub .01)
D 4981-95(2003), Test Method
for Screening of Oxidizers in Waste (Item
3) (Sub .01) (CC)
D 5050-96(2007), Guide for
Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts (Item
10) (Sub .03) (CC)
D 5681-98A(2004)E01,
Terminology for Waste and Waste Management
(Items 18,19,20,21,22,23,24,25,26) (Sub .94) (CC)
D 6050-97(2003)E01, Test Method for Determination of Insoluble Solids in
Organic Liquid Hazardous Waste
(Item 9) (Sub .01) (CC)
D 6270-98(2004), Practice for
Use of Scrap Tires in Civil Engineering Applications (Item
11) (Sub .03) (CC)
E 777-87(2004), Test Method
for Carbon and Hydrogen in the Analysis Sample of Refuse-derived Fuel (Item 13) (Sub .03) (CC)
E 778-87(2004), Test Methods
for Nitrogen in the Analysis Sample of Refuse-derived Fuel (Item
14) (Sub .03) (CC)
E 790-87(2004), Test Method
for Residual Moisture in a Refuse-derived Fuel Analysis Sample (Item
15) (Sub .03) (CC)
E 791-90(2004), Test Method
for Calculating Refuse-derived Fuel Analysis Data from As-determined to
Different Bases (Item 16) (Sub .03) (CC)
E 953-88(2004), Test Method
for Fusibility of Refuse-derived Fuel Rdf Ash (Item
17) (Sub .03) (CC)
REAPPROVAL OF STANDARD
D 4503-08, Practice for
Dissolution of Solid Waste by Lithium Metaborate Fusion (Item
1) (Sub .01)
D 5231-92(2003), Test Method
for Determination of the Composition of Unprocessed Municipal Solid Waste (Item 4) (Sub .01)
D 5369-93(2003), Practice for
Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction (Item 6) (Sub .01)
D 5451-93(2004), Practice for
Sampling Using a Trier Sampler (Item
7) (Sub .01)
D 5633-04, Practice for
Sampling with a Scoop
(Item 8) (Sub .01)
E 775-87(2004), Test Methods
for Total Sulfur in the Analysis Sample of Refuse-derived Fuel (Item
12) (Sub .03)
WITHDRAWAL OF STANDARD
D 5285-03, Test Method for
24-hour Batch-type Measurement of Volatile Organic Sorption by Soils and
Sediments (Item 5) (Sub .01) (CC)
E01 on Analytical Chemistry for Metals, Ores and
Related Materials (#08-03)
REVISION OF STANDARD
E 135-08b, Terminology
Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Items
19,20,21,22,23,24,25,26,27,28,29,30,31,32) (Sub .23) (CC)
E 463-03, (Includes Change to
Title) Test Method for Silica in Fluorspar by the Silico-molybdate Visible Spectrometry (Item 4) (Sub .02) (CC)
E 478-03, Test Methods for
Chemical Analysis of Copper Alloys (Item
14) (Sub .05) (CC)
E 507-03, (Includes Change to
Title) Test Method for Aluminum in Iron Ores by Atomic ABSorption Spectrometry (Item 5) (Sub .02) (CC)
E 508-03, (Includes Change to
Title) Test Method for Calcium and Magnesium in Iron Ores by Atomic ABSorption Spectrometry (Item 6) (Sub .02) (CC)
E 877-03, (Includes Change to
Title) Practice for Sampling and Sample Preparation of Iron Ores and Related Materials (Item 7) (Sub .02) (CC)
E 1569-03, (Includes Change
to Title) Test Method for Determination of Oxygen in Tantalum Powder (Item 15) (Sub .06) (CC)
E 1834-96(2002), (Includes
Change to Title) Test Method for Determination of Lead in Nickel Alloys by
Electrothermal Atomic ABSorption Spectrometric Method (Item
16) (Sub .08) (CC)
E 1917-02, (Includes Change
to Title) Test Method for Determination of Phosphorus in Nickel, Ferronickel,
and Nickel Alloys by the Phosphovanadomolybdate Molecular ABSorption
Spectrometric Method (Item 17) (Sub .08) (CC)
E 1938-02, (Includes Change
to Title) Test Method for Determination of Titanium in Nickel Alloys by the
Diantipyrylmethane Molecular ABSorption Spectrometric Method (Item
18) (Sub .08) (CC)
REAPPROVAL OF STANDARD
E 276-03, Test Method for
Particle Size or Screen Analysis at No. 4 4.75-mm Sieve and Finer for
Metal-bearing Ores and Related Materials
(Item 2) (Sub .02)
E 389-03, Test Method for
Particle Size or Screen Analysis at No. 4 4.75-mm Sieve and Coarser for
Metal-bearing Ores and Related Materials
(Item 3) (Sub .02)
E 1568-03, Test Method for
Determination of Gold in Activated
Carbon by Fire Assay Gravimetry (Item
8) (Sub .02)
E 2293-03, Practice for
Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials
for the Determination of Mercury (Item
9) (Sub .02)
E 2294-03, Practice for Proof
Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by
Fire Assay Gravimetry
(Item 10) (Sub .02)
E 2295-03, Practice for Fire
Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and
Related Metallurgical Materials by Silver Determination in Slags and Cupels (Item 11) (Sub .02)
E 2296-03, Practice for
Silver Corrections in Metal Bearing Ores, Concentrates, and Related
Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry (Item 12) (Sub .02)
WITHDRAWAL OF STANDARD
E 35-88(2002), Test Methods
for Chemical Analysis of Magnesium and Magnesium Alloys (Item
13) (Sub .04) (CC)
E06 on Performance of Buildings (#08-02)
REVISION TO NEW STANDARD
E 2618-08, Test Method for
Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid
Fuel-fired Hydronic Heating Appliances (Item
11) (Sub .54) (CC)
NEW STANDARD, Specification
for Minimum Attributes of a Building That Promote Sustainability (Item
21) (Sub .71) (CC) (Ref. WK11944
)
NEW STANDARD, Specification
for Flat Wall Insulating Concrete Form (icf) Systems (Item
1) (Sub .21) (CC) (Ref. WK16256
)
NEW STANDARD, Practice for
Water Conservation in Buildings Through in Situ Water Reclamation (Item
24) (Sub .71) (CC) (Ref. WK18426
)
NEW STANDARD, Classification
for Environmentally Preferable Products (Item
25) (Sub .71) (CC) (Ref. WK18435
)
NEW STANDARD, Guide for
Utilizing the Environmental Cost Element Structure Presented by Classification
Standard E2150 (Item 28) (Sub .81)
(Ref. WK19053 )
NEW STANDARD, Specification
for Flexible Sheet Water-resistive Barriers Intended for Mechanical Attachment (Item 12) (Sub .55) (CC) (Ref. WK6399 )
NEW STANDARD, Specification
for Use of Expanded Shale, Clay and Slate (escs) as a Mineral Component in the
Growing Media and the Drainage Layer for Green Roof Systems (Item
23) (Sub .71) (CC) (Ref. WK7319
)
REVISION OF STANDARD
E 154-08, Test Methods for
Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on
Walls, or as Ground Cover (Item 2) (Sub .21) (CC)
E 779-03, Test Method for
Determining Air Leakage Rate by Fan Pressurization (Item
7) (Sub .41) (CC)
E 833-06, Terminology of
Building Economics (Items
26,27) (Sub .81)
E 1643-98(2005), Practice for
Installation of Water Vapor Retarders Used in Contact with Earth or Granular
Fill Under Concrete Slabs
(Item 3) (Sub .21) (CC)
E 1745-97(2004),
Specification for Plastic Water Vapor Retarders Used in Contact with Soil or
Granular Fill Under Concrete Slabs (Item
4) (Sub .21) (CC)
E 2114-06a, Terminology for
Sustainability Relative to the Performance of Buildings (Items 14,15,16,17,18,19,20) (Sub .71)
(CC)
E 2266-04, Guide for Design
and Construction of Low-rise Frame Building Wall Systems to Resist Water Intrusion (Item 13) (Sub .55) (CC)
E 2342-03, Test Method for
Durability Testing of Duct Sealants (Item
8) (Sub .41) (CC)
E 2392-05, Guide for Design
of Earthen Wall Building Systems (Item
22) (Sub .71)
REAPPROVAL OF STANDARD
E 1424-91(2000), Test Method
for Determining the Rate of Air Leakage Through Exterior Windows, Curtain
Walls, and Doors Under Specified Pressure and Temperature Differences Across
the Specimen (Item 9) (Sub .51)
E 2068-00, Test Method for
Determination of Operating Force of Sliding Windows and Doors (Item
10) (Sub .51)
E 2167-01, Guide for
Selection and Use of Stone Consolidants (Item
5) (Sub .24)
E 2260-03, Guide for
Repointing Tuckpointing Historic Masonry (Item
6) (Sub .24)
E28 on Mechanical Testing (#08-02)
NEW STANDARD
New Standard, Practice for
Torque Calibration of Testing Machines and Devices (Item
1) (Sub .01) (CC) (Ref. WK6364
)
REVISION OF STANDARD
E 6-08, Terminology Relating
to Methods of Mechanical Testing (Items
6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55)
(Sub .91) (CC)
REAPPROVAL OF STANDARD
E 190-92(2003), Test Method
for Guided Bend Test for Ductility of Welds (Item
2) (Sub .02)
E 448-82(2002)E01, Practice for Scleroscope Hardness Testing of Metallic
Materials (Item 3) (Sub .06)
E 604-83(2002), Test Method
for Dynamic Tear Testing of Metallic Materials (Item
4) (Sub .07)
E 1856-97(2002), Guide for
Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal
Testing Machines (Item 5) (Sub .15)
E30 on Forensic Sciences (#08-02)
REVISION OF STANDARD
E 2287-03, Guide for
Examination of Fracture Patterns and Paper Fiber Impressions on Single-strike
Film Ribbons and Typed Text (Items 3,4)
(Sub .02) (CC)
E 2288-03, Guide for Physical
Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations (Items
5,6) (Sub .02) (CC)
E 2329-04, Practice for
Identification of Seized Drugs (Item
1) (Sub .01) (CC)
REAPPROVAL OF STANDARD
E 2195-02E01, Terminology
Relating to the Examination of Questioned Documents (Item
2) (Sub .02)
E31 on Healthcare Informatics (#08-02)
REAPPROVAL OF STANDARD
E 1715-01, Practice for an
Object-oriented Model for Registration, Admitting, Discharge, and Transfer Radt
Functions in Computer-based Patient Record Systems (Item
1) (Sub .25)
E 2171-02, Practice for
Rating-scale Measures Relevant to the Electronic Health Record (Item
2) (Sub .25)
E33 on Building and Environmental Acoustics (#08-02)
NEW STANDARD
New Standard, Test Method for
Measurement of Normal Incidence Sound Transmission of Acoustical Materials
Based on the Transfer Matrix Method (Item
4) (Sub .03) (CC) (Ref. WK5285
)
New Standard, Test Method for
Objective Measurement of the Speech Privacy of Closed Rooms (Item
13) (Sub .03) (CC) (Ref. WK8777
)
REVISION OF STANDARD
C 423-08, Test Method for
Sound ABSorption and Sound ABSorption Coefficients by the Reverberation Room Method (Item 1) (Sub .01) (CC)
C 634-08, Terminology Relating
to Building and Environmental Acoustics (Item
12) (Sub .07) (CC)
E 336-07, Test Method for
Measurement of Airborne Sound Attenuation Between Rooms in Buildings (Items 5,6,7,8,9,10) (Sub .03) (CC)
E 580/E 580M-08, Practice for
Application of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels
in Areas Requiring Seismic Restraint
(Items 14,15,16,17,18,19,20) (Sub .04) (CC)
E 1130-02E01, Test Method for
Objective Measurement of Speech Privacy in Open Offices Using Articulation Index (Item 3) (Sub .02)
E 1264-98(2005),
Classification for Acoustical Ceiling Products (Item
11) (Sub .04) (CC)
E 2235-04E01, Test Method for
Determination of Decay Rates for Use in Sound Insulation Test Methods (Item 2) (Sub .01) (CC)
E37 on Thermal Measurements (#08-03)
NEW STANDARD
New Standard, Practice for
Calibration of Fixed-cell Differential Scanning Calorimeters (Item
14) (Sub .09) (Ref. WK14820 )
New Standard, Test Method for
the Assignment of the Glass Transition Temperature by Modualated Temp Erature
Differential Scanning Calorimetry (Item
1) (Sub .01) (CC) (Ref. WK9144
)
E37 on Thermal Measurements (#08-04)
REVISION OF STANDARD
E 473-07b, Terminology
Relating to Thermal Analysis and Rheology (Items 1,2,3,4,5,6,7,8) (Sub .03) (CC)
E37 on Thermal Measurements (#08-03)
REVISION OF STANDARD
E 928-03, Test Method for
Purity by Differential Scanning Calorimetry (Item
2) (Sub .01) (CC)
E 967-03, Test Method for
Temperature Calibration of Differential Scanning Calorimeters and Differential
Thermal Analyzers (Item 3) (Sub .01) (CC)
E 1131-03, Test Method for
Compositional Analysis by Thermogravimetry (Item
4) (Sub .01) (CC)
E 1356-03, Test Method for
Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (Item 5) (Sub .01) (CC)
E 1363-03, Test Method for
Temperature Calibration of Thermomechanical Analyzers (Item
6) (Sub .01) (CC)
E 1858-03, Test Method for
Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry (Item 7) (Sub .01) (CC)
E 2008-07, Test Method for
Volatility Rate by Thermogravimetry (Item
8) (Sub .01) (CC)
E 2009-02, Test Method for
Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry (Item 9) (Sub .01) (CC)
E 2040-03, Test Method for
Mass Scale Calibration of Thermogravimetric Analyzers (Item
10) (Sub .01) (CC)
E 2041-03, Method for
Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the
Borchardt and Daniels Method
(Item 11) (Sub .01) (CC)
E 2253-03, Method for
Enthalpy Measurement Validation of Differential Scanning Calorimeters (Item
12) (Sub .01) (CC)
REAPPROVAL OF STANDARD
E 968-02, Practice for Heat
Flow Calibration of Differential Scanning Calorimeters (Item
13) (Sub .01)
E54 on Homeland Security Applications (#08-02)
NEW STANDARD
New Standard, Test Method for
Blast Resistance of Trash Receptacles (Item
2) (Sub .08) (Ref. WK11343 )
New Standard, Guide for
Resource Management in Emergency Management and Homeland Security (Item
1) (Sub .02) (CC) (Ref. WK16252
)
F20 on Hazardous Substances and Oil Spill Response
(#08-02)
NEW STANDARD
New Standard, Guide for
Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and
Other Inland Environments, Permeable Surfaces (Item
7) (Sub .13) (CC) (FORMERLY F1279-90(1999) )
New Standard, Guide for
Ecological Considerations for the Use of Oilspill Dispersants in Freshwater and
Other Inland Environments, Impermeable Surfaces (Item
8) (Sub .13) (CC) (FORMERLY F1280-90(1999) )
New Standard, Test Method for
Determining Nameplate Recovery Rate of Stationary Oil Skimmer Systems (Item 2) (Sub .11) (CC) (Ref. WK11447 )
New Standard, Guide for
Selection of Booms for Oil-spill Response (Item
1) (Sub .11) (CC) (Ref. WK12691
)
REVISION OF STANDARD
F 1084-90(2002), Guide for
Sampling Oil/water Mixtures for Oil Spill Recovery Equipment (Item
3) (Sub .12) (CC)
F 1779-97(2003), Practice for
Reporting Visual Observations of Oil on Water (Item
11) (Sub .16) (CC)
F 1780-97(2002), Guide for
Estimating Oil Spill Recovery System Effectiveness (Item
4) (Sub .12) (CC)
F 1788-97(2003), Guide for
In-situ Burning of Oil Spills on Water: Environmental and Operational Considerations (Item 9) (Sub .15) (CC)
F 2204-02, Guide for
Describing Shoreline Response Techniques (Item
13) (Sub .17) (CC)
F 2230-02, Guide for In-situ
Burning of Oil Spills on Water: Ice Conditions (Item
10) (Sub .15) (CC)
F 2327-03, Guide for
Selection of Airborne Remote Sensing Systems for Detection and Monitoring of
Oil on Water (Item 12) (Sub .16) (CC)
REAPPROVAL OF STANDARD
F 1607-95(2003), Guide for
Reporting of Test Performance Data for Oil Spill Response Pumps (Item
5) (Sub .12)
F 1778-97(2002), Guide for
Selection of Skimmers for Oil-spill Response (Item
6) (Sub .12)
F24 on Amusement Rides and Devices (#08-02)
NEW STANDARD
New Standard, Practice for
Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment (Item 7) (Sub .70) (CC) (Ref. Z9653Z)
New Standard, Practice for
Design, Manufacture, Installation and Testing of Climbing Nets and Netting/mesh
Used in Amusement Rides, Devices, Play Areas and Attractions (Item
3) (Sub .24) (CC) (Ref. WK526
)
REVISION OF STANDARD
F 770-06a, Practice for
Ownership and Operation of Amusement Rides and Devices (Item
6) (Sub .40) (CC)
F 853-05a, (Includes Change
to Title) Practice for Maintenance Procedures for Amusement Rides and Devices (Item 4) (Sub .30) (CC)
F 893-05a, (Includes Change
to Title) Guide for Inspection of Amusement Rides and Devices (Item
5) (Sub .30) (CC)
F 2291-08, Practice for
Design of Amusement Rides and Devices (Items 1,2) (Sub .24) (CC)
G04 on Compatibility and Sensitivity of Materials in
Oxygen Enriched Atmospheres (#08-02)
REVISION OF STANDARD
G 74-01, Test Method for
Ignition Sensitivity of Materials to Gaseous Fluid Impact (Item
1) (Sub .01) (CC)
G 145-96(2001), Guide for
Studying Fire Incidents in Oxygen Systems (Item
6) (Sub .02) (CC)
REAPPROVAL OF STANDARD
G 120-01, Practice for
Determination of Soluble Residual Contamination in by Soxhlet Extraction (Item 3) (Sub .02)
G 122-96(2002), Test Method
for Evaluating the Effectiveness of Cleaning Agents (Item
2) (Sub .01)
G 128-02E01, Guide for
Control of Hazards and Risks in Oxygen Enriched Systems (Item
4) (Sub .02)
G 131-96(2002), Practice for
Cleaning of Materials and Components by Ultrasonic Techniques (Item
5) (Sub .02)
J01 on Joint Astm/nace Committee on Corrosion (#08-01)
REVISION TO NEW STANDARD
W K16648, Terminology for and
Acronyms Relating to Corrosion (Items
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67)
(Sub .02) (CC) (Ref. WK16648 )